Filed Under (Miscellaneous) by Mason Pan on May-1-2007

European Standards For Wood-based Panels
CEN/TS 13810-2: Wood-based panels — Floating floors — Part 2: Test methods.
EN 1058: Wood-based panels — Determination of characteristic values of mechanical properties and density.
EN 1072: Plywood — Description of bending properties for structural plywood.
EN 1195: Timber structures — Test methods — Performance of structural floor decking.
EN 12369-2: Wood-based panels — Characteristic values for structural design —Part 2: Plywood.
EN 13446: Wood-based panels — Determination of withdrawal capacity of fasteners.
EN 13810-1: Wood-based panels — Floating floors — Part 1: Performance specifications and requirements.
EN 13986: Wood-based panels for use in construction — Characteristics: evaluation of conformity and marking.
EN 310: Wood-based panels — Determination of modulus of elasticity in bending and of bending strength.
EN 314-1: Plywood — Bonding quality — Part 1: Test methods.
EN 314-2: Plywood — Bonding quality — Part 2: Requirements.
EN 315: Plywood — Tolerances for dimensions.
EN 318: Wood-based panels — Determination of dimensional changes associated with changes in relative humidity.
EN 322: Wood-based panels — Determination of moisture content.
EN 323: Wood-based panels — Determination of density.
EN 324-1: Wood-based panels — Determination of dimensions of boards — Part 1: Determination of thickness: width and length.
EN 324-2: Wood-based panels — Determination of dimensions of boards — Part 2: Determination of squareness and edge straightness.
EN 326-1: Wood-based panels — Sampling: cutting and inspection — Part 1: Sampling and cutting of test pieces and expression of test results.

EN 326-2: Wood based panels — Sampling: cutting and inspection — Part 2: Quality control in the factory.
EN 326-3: Wood based panels — Sampling: cutting and inspection — Part 3: Inspection of a consignment of panels.
EN 335-3: Durability of wood and wood-based products — Definition of hazard classes of biological attack – Part 3: Application to wood-based panels.
EN 342-2: Wood-based panels — Determination of dimensions of boards — Part 2: Determination of squareness and edge straightness.
EN 594: Timber structures — Test methods — Racking strength and stiffness of timber frame wall panels.
EN 596: Timber structures — Test methods — Soft body impact test of timber framed walls.
EN 635-1: Plywood — Classification by surface appearance — Part 1: General.
EN 635-2: Plywood — Classification by surface appearance — Part 2: Hardwood.
EN 635-3: Plywood — Classification by surface appearance — Part 3: Softwood.
EN 635-5: Plywood — Classification by surface appearance — Part 5: Method for measuring and expressing char-acteristics and defects.
EN 717-2: Wood-based panels — Determination of formaldehyde release — Part 2: Formaldehyde release by the gas analysis method.
EN 789: Timber structures — Test methods — Determination of mechanical properties of wood based panels.
EN 1087-1:1995: Particleboards – Determination of moisture resistance – Part 1: Boil test
EN 12871: Wood-based panels — Performance specifications and requirements for load-bearing boards for use in floors: walls and roofs.
EN 13353:2003 Solid wood panels (SWP). Requirements
EN 13986:2002: Wood-based panels for use in construction — Characteristics: evaluation of conforming and marking.
EN 310:1993: Wood-based panels — Determination of modulus of elasticity in bending and of bending strength.
EN 317: Particleboards and Fibreboards — Determination of swelling in thickness after immersion in water.
EN 318: Wood based panels – Determination of dimensional changes associated with changes in relative humidity
EN 319: Particleboards and Fibreboards — Determination of tensile strength perpendicular to the plane of the board.
EN 622-1: Fibreboards — Specifications — Part 1: General requirements.
ENV 1156: Wood-based panels — Determination of duration load and creep factors.
ENV 14272: Plywood — Calculation method for some mechanical properties.
ENV 635-4: Plywood — Classification by surface appearance — Part 4: Parameters of ability for finishing -Guideline.
ENV 717-1: Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the chamber method.
ENV 1995-1-1:1993: Eurocode 5 — Design of timber structures Part 1-1: General rules and rules for buildings.

Related Posts:

(0) Comments    What next?

Post a comment

Name(required): 
Email(required): 
URL(optional): 
Comments: