ISO Standards For Wood-based Panels In General

ISO 9424:2003
Wood-based panels — Determination of dimensions of test pieces

ISO 9426:2003
Wood-based panels — Determination of dimensions of panels

ISO 9427:2003
Wood-based panels — Determination of density

ISO 12460-1:2007
Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the 1-cubic-metre chamber method

ISO 12460-3:2008
Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method

ISO 12460-4:2008
Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method

ISO 12460-4:2008/Amd 1:2011
ISO 12460-5:2011
Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perforator method)

ISO 16572:2008
Timber structures — Wood-based panels — Test methods for structural properties
ISO 16978:2003
Wood-based panels — Determination of modulus of elasticity in bending and of bending strength

ISO 16979:2003
Wood-based panels — Determination of moisture content

ISO 16981:2003
Wood-based panels — Determination of surface soundness

ISO 16983:2003
Wood-based panels — Determination of swelling in thickness after immersion in water

ISO 16984:2003
Wood-based panels — Determination of tensile strength perpendicular to the plane of the panel

ISO 16985:2003
Wood-based panels — Determination of dimensional changes associated with changes in relative humidity

ISO 16987:2003
Wood-based panels — Determination of moisture resistance under cyclic test conditions

ISO 16998:2003
Wood-based panels — Determination of moisture resistance — Boil test

ISO 16999:2003
Wood-based panels — Sampling and cutting of test pieces

ISO 18775:2008
Veneers — Terms and definitions, determination of physical characteristics and tolerances

ISO 20585:2005
Wood-based panels – Determination of wet bending strength after immersion in water at 70 degrees C or 100 degrees C (boiling temperature)

ISO 21887:2007
Durability of wood and wood-based products — Use classes

ISO 27528:2009
Wood-based panels — Determination of resistance to axial withdrawal of screws